


Adjusting a cam arm from one wheel diameter to another in seconds make these quick setup wheel chucks ideal for aftermarket wheel manufacturers and OEM suppliers who handle short-run specialty wheels. Each cam arm handles four diameters within a 69 range. One: Insert wrench. Two: Crank cam arms to desired diameter. Three: Remove wrench.
LPS Series workholding products for automobiles and light trucks allow for variations in raw castings as well as for new “fashion” wheel designs where material is added to the raw casting for first operation holding.
Lean Production Series Specifications |

Model Number |
Capacity Wheel Dia. |
RPM's (max) |
Drawbar Pull (lbs) |
Drawbar Stroke (in/ mm) |
Spindle Mount |
Chuck Wt. (lbs) |
“A” dia. (in/ mm) |
“B” (in/ mm) |
LPS-1520 |
15" to 20" |
2800 |
7700 |
1.38/35 |
A2-8 |
330 |
29.45-748.0 |
7.32-186.0 |
LMC Workholding
P.O. Box 7006 • 1200 West Linden Avenue
Logansport, IN 46947-7006 USA
Phone: 574-735-0225 • Fax: 574-722-6559
E-Mail: info@LMCworkholding.com