|
|
|||
|
|
|||
 |
|||
 |
 |
 |
|
Now Accepted |
|||
LMC Workholding
Company and Product News
|
LMC Extra Large Face Driver for Large Workpieces from LMC Workholding
The FSB 75 face driver from LMC Workholding is used to efficiently cut large workpieces. The FSB 75 is able to make heavy cuts on large barstock and forged workpieces up to 12’ long, 28” in diameter and weighing up to 13,000 pounds. This face driver has an infeed up to 32mm and a feed rate of approximately 1mm/rotation. This extra large face driver can be used in applications such as mining, heavy engineering industry and manufacturers of semi-finished parts (shafts and forged rolls).
Face drivers quickly grip and turn
a workpiece from its end, allowing the operator
to turn, grind, mill or hard-turn the entire O.D.
of the workpiece in one operation. Mechanical face drivers allow turning applications to have increased flexibility to lower cycle times and allow large interrupted and heavy cuts. LMC face drivers
offer fast set-up, quick change overs, improved part quality, reduced cost and lower maintenance.
The entire LMC Workholding line includes...
- LMC power chucks, cylinders and wheel chucks;
- Atling Steady Rests;
- Face drivers, as well as live and dead centers.
Contact Logansport Matsumoto Company, P.O. Box 7006, Logansport, IN 46947-7006, Telephone 574-735-0225, Fax 574-722-6559.
LMC Workholding
P.O. Box 7006 • 1200 West Linden Avenue
Logansport, IN 46947-7006 USA
Phone: 574-735-0225 • Fax: 574-722-6559
E-Mail: info@LMCworkholding.com