IMTS 2012
See us at booth W-1314
Sept. 10-15, Chicago



Now Accepted
lmc Workholding Tooling

LMC Workholding / Richter Manual Steady Rests...

Steady with collapsible top (Type 1)

Suitable for tools with diameters ranging from 20 to 450 mm and loads up to 5 tons. Sometimes, gas springs are used for diameters more than 300 mm with sleeves 70 mm and above. This makes the operation easier. The smallest steady is suitable for diameters ranging from 20 to 200 mm.

This steady is also fitted with the protected electronic measuring device. The steady can identify the center of its machine and the sleeves can be preset on the basis of the tool diameter. This idea, which is patented, was devised by the master toolmaker, Harry Richter and then developed for application by Richter Vorrichtungsbau.

Type 1/1 - with collapsible top
Examples:
(Picture gallery)

top
Type 1/2 - with sliding chucks
Examples:
(Picture gallery)

top
Type 1/3 - with collapsible top and gas spring
Examples:
(Picture gallery)

top
Type 1/4 - with measuring system
Examples:
(Picture gallery)

top
Type 1/5 - for CNC lathe with swiveling top
Examples:
 
(Picture gallery)

top
Type 1/6 - with swiveling pressure roller

Examples:

No Examples

 

 

 

(Picture gallery)

top
Type 1/7 - with 4 sleeves
Examples:


(Picture gallery)

Back to Top


Workholdings 1st CallLMC Workholding
P.O. Box 7006 • 1200 West Linden Avenue
Logansport, IN 46947-7006 USA
Phone: 574-735-0225 • Fax: 574-722-6559
E-Mail: info@LMCworkholding.com