Standard and Lightweight Series Wheel Chucks from LMC Workholding.
This lightweight chuck series, available in four models, does it all. The WTi fits automobile and light truck wheels 149 to 209, truck and bus wheels up to 24.59.
Contact LMC Workholding for the optimum clamping solution and workholding products. US Series wheel chucks are lightweight for increased spindle life and faster cycle times. Optional part detection system, consisting of three air-activated plungers, senses whether or not the workpiece is properly seated, an essential component for any automatic/robot loaded application.
Clamp
Unclamp
| Model Number | WTi-310/ US-1420 | WTi-322/US-1524 |
|---|---|---|
| Capacity Wheel Diameter | 14 to 20 | 15 to 24.5 |
| RPM's (max) | 2800 | 2200 |
| Drawbar Pull (lbs) | 7700 | 7700 |
| Drawbar Stroke (in/mm) | 1.38/ 35 | 1.38/ 35 |
| Spindle Mount | A2-8 | A2-11 |
| Chuck Wt. (lbs) | 264/160 | 410/240 |
| A dia. (in/mm) | 21.5/546.2 | 26.00/660.0 |
| B (in/ mm) | 5.90/ 149.7 | 7.85/199.5 |
| Model Number | WTi-310/US-1420 | WTi-322/US-1524 | |
|---|---|---|---|
| SS-3/4EX | E | 21.5/547 | 26.0/660 |
| F | 22.4/570 | 26.5/673 | |
| S-3/4EX | E | 21.5/547 | 26.0/660 |
| F | 23.0/584 | 27.5/698 | |
| L-3/4EX | E | 22.0/559 | 26.6/675 |
| F | 24.1/611 | 28.5/724 | |
| SL-3/4EX | E | 23.1/587 | 27.6/702 |
| F | 25.0/634 | 29.5/749 | |
| Z-3/4EX* | E | 24.3/618 | 28.6/727 |
| F | 26.2/665 | 30.5/774 | |
| *XXL arm for WTi-321 and WTi-322 | |||
